Advanced Elements AF-4500s Podręcznik Użytkownika Pobierz pdf (Strona 3)

First Engine Start

□ With relay protection diodes installed, your AFS screen(s) can be turned on before the engine is

started.

□ After the engine has started, verify oil pressure and temperature. If none is indicated

SHUT DOWN the engine. Verify all wiring and consult your local A&P, the engine

manufacturer, and/or AFS technical support.

□ Verify all engine indications are correct per your engine manufacturers manual

Before First Flight

□ Verify you have the latest system software and mapping data (if applicable) - Visit the

AFS Website for latest software and map data.

□ Weight & Balance page updated with your aircrafts data

□ Checklist pages updated with information from your aircraft manufacturer

□ Magnetometer Alignment completed on all screens with an AHRS installed (See video on AFS

website Support Forum)

□ EFIS AOA Calibration Checklist completed

□ Pitot/Static check completed from an authorized FAA Repair Station.

□ EFIS and autopilot gains are set per the installation manual

In-Flight Configuration

□ Verify airspeed and altitude indicate correctly

□ Verify heading indicates correctly using a backup whiskey compass for reference

□ Test navigation sources and verify they function properly

□ If an autopilot is installed and coupled to the EFIS, check its functions

After First Flight

□ Calibrate Fuel Flow K-Factor (See Installation Manual)

AOA FLIGHT WARNING:

The EFIS may be shipped with AOA aircraft calibration data pre-installed. If you choose to use this data,

you must verify the validity of the data or calibrate the AOA to meet your specifications before using. You

must also read and understand the separate AOA manual before using the AOA instrument in flight.

1 2 3 4 5 6 7 8 ... 128 129

Brak uwag

Advanced Elements AF-4500s Podręcznik Użytkownika Strona 3